GaragePride 5 Piece Cabinet Set G2021

evoline® Heavy Duty
Dimensions: 2650 W x 2100 H x 550 D (mm). Large capacity for tools and general storage with seating area.

Buy online or by telephone on 01743 742028 during office hours
Need advice or a detailed quotation? Call one of our garage interior design and installation experts.
GaragePride payment methods

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Information FAQs Delivery & Returns

Like all GaragePride’s evoline® products the 5-piece cabinet set comes with a 10-year warranty. Modular in design, the 5-piece set can be reconfigured to suit your requirements, whether to accommodate separate areas or to mix and match with other evoline® sets and individuals.

It comes with a variety of features. Fully welded construction (not flat-packed), soft closing doors, secure locking, adjustable levelling feet and a range of accessories – drawer mats, drawer dividers (ordered separately) and clothes hanging rails. Many more features are bulleted below.

Overall Dimensions: 2650 W x 2100 H x 550 D (mm)

Product Features:

10-year guarantee
Made in the UK
Fully welded construction
Soft closing doors
Secure locking on all units
Tough hard-wearing worktops
Industrial scratch resistant powder coated finish
Double-skinned steel door & drawer fronts
Cable management holes with grommets
Adjustable levelling feet
Heavy duty steel gauge
A range of accessories - drawer mats, dividers, clothes hanging rails

Please note that back panels and wall cupboards need fixing to walls conventionally using wall plugs and screws suitable for your wall material. Please employ a tradesman if in doubt.

Set Includes:

1 x Tall Cupboard

Soft close hinges
Height adjustable feet for even levelling
Easy cable management access from low rear cut-out
Includes 3 adjustable removable steel shelves
Shelf capacity (Each): 60kg U.D.L.
Secure 2-point locking mechanism
Double-skinned steel door fronts
2100 H x 1050 W x 550 D (mm)

1 x 5 Drawer Cabinet

Height adjustable feet for even levelling
Full extension drawers
Double-skinned steel drawer fronts
Single locking mechanism locks all drawers simultaneously
Drawer capacity (Each): 60kg U.D.L.
900 H x 800 W x 550 D (mm)

2 x Wall Cupboards

Soft close hinges
Shelf capacity: 60kg U.D.L.
Secure 2-point locking mechanism
Double-skinned steel door fronts
500 H x 800 W x 350 D (mm)

1 x Lino or Beech Worktop

Lino worktop: 35 T x 1600 L x 550 D (mm)

An easy to clean top with a marbled effect finish. It has good impact resistance, as well as excellent surface resistance to water, oils, acids and chemicals. 35mm thick with a 32mm particle board core and a 2mm grey linoleum surface.

Beech worktop: 35 T x 1600 L x 550 D (mm)

An all-purpose, traditional in style beech worktop. 35mm thick, resin bonded, layered hardwood beech ply with cross laminated construction. A tough general duty worktop suitable for most applications.

Need a hand?

Give us a call on...

01743 742 028

Frequently Asked Questions

Are the cabinets delivered fully assembled?

Yes, all evoline® heavy duty cabinets are fully manufactured and ready for use apart from the following small task. You need to tilt the floor cabinets slightly backwards, with assistance, and screw in the feet. The minimum height of the tall cupboard is 2100mm with the feet attached. There is about 2cm adjustment in the feet. If you have a garage with a low ceiling then you can leave the feet off and unscrew their corner brackets resulting in a cabinet of 2000mm height.

Can the evoline® cabinet sets be reconfigured?

The units shown in the sets are supplied individually so can be positioned in any way you wish. Individual cabinets can be purchased in the evoline® range to complement the sets. Please speak to us to see what opportunities might be available to achieve your perfect cabinet set-up in the most cost-effective manner.

Of what materials are the cabinets manufactured?

Steel, with a heavy duty industrial powder paint coating to protect them from garage and industrial environments. The evoline® cabinets are manufactured using a typical gauge of steel for industrial cabinets. This allows them to be heavily loaded and provide many years of use in a residential application.

Are alternative worktops available?

At present, two tops are available, lino-clad and multi-layered beech. They are both very hard-wearing and great looking. The lino-clad worktop has an attractive marbled finish and hides stains and marks exceptionally well. It is banded all around the edge with light grey PVC. The colour of the lino-clad worktop complements the cabinets perfectly. The multi-layered beech worktop would benefit from a coating of Danish oil for best appearance and longevity.

How are the cabinets delivered?

They will be delivered by pallet carrier using a rigid HGV having a rear tail lift and "pump truck". Pallet carriers provide a "kerbside" delivery service. Whilst some drivers will be more obliging if access to your garage is on the level and straightforward with a dropped kerb, delivery into the garage cannot be guaranteed.

To move the cabinets off the pallets you will need able assistance and preferably a strong trolley or sack truck. Lock the doors and drawers to stop them from opening whilst the units are being moved. Remove the keys to save them getting damaged. PLEASE NOTE - you will find that the tall cupboards are fixed to the pallet using two to four long self-tapping screws through the floor. These will need removing using a Phillips screwdriver, or better still a drill fitted with a Phillips driver bit.

The order confirmation email will provide further information.

What shelves are provided in the cupboards?

The tall cupboard comes with three shelves. The low cupboard comes with a single shelf. The wall cupboard has no shelves, it is 500mm high internally. A shelf can be purchased to suit the wall cupboards if required. Where shelves are fitted, you can adjust the height of each shelf in small increments. Extra shelves can be purchased for all cupboards.

Are the products free-standing?

evoline® wall cupboards and back panels need to be fitted to the garage or workshop walls conventionally using suitable fixings and wall plugs (where required). Our manufacturer does not supply the fixings due to the wide range of wall materials used in construction. Where you have a stud wall then it is strongly recommended that you fix the products deeply into the stud behind using suitable wood screws.

What accessories are available?

You can specify a hanging rail for the tall cupboard, and space shelves out accordingly. The base of the drawer cabinet is hard-wearing and corrosion-resistant galvanised steel for protection, but you can also specify inlay mats to save the contents from sliding about. In addition drawer divider sets are available. A range of tool hooks is available for the perforated back panels.

Delivery & Returns

Delivery of Goods

We will endeavour to have the goods delivered as soon as possible in line with the lead times stated on the product pages. We will let you know if we are aware of delays. If you do not receive your goods or contact from the carrier within a reasonable time please contact us by telephone or e-mail.

Cabinet Deliveries

Delivery is by third party pallet carrier to the nearest kerbside, though individual drivers may be more accommodating if access to your garage is straightforward. Carriers are instructed to contact you to book in the delivery day at which point you should make them aware of any delivery restraints or requirements if you have not already advised GaragePride. If you require specific day deliveries then please let us know at the time of ordering and we will endeavour to accommodate this. Most of our cabinets are heavy and you should obtain assistance when moving them. Carriers are not able to move cabinets up steps and into office buildings.

Returns

A consumer has the right to cancel the purchase of an item or service without having to give any reason at any time within the "cooling off period" of fourteen working days, beginning in the case of goods, on the day after you receive the goods, and in the case of services, beginning on the day after you purchase the services.

Please be aware that you will lose your right to cancel a contract for the provision of services during the cooling-off period once we have commenced activation of the services or you use the services, whichever is earlier.

You must notify us of your cancellation in writing or in another durable medium to our contact address or by email to the email address from which your order confirmation was sent.

If you are in possession of the goods you are under the duty to retain them and take good care of them. We will make arrangements to collect the goods from you Monday to Friday. You must make them available and ready for collection. We reserve the right to charge for the direct costs of recovery. Once you have notified us that you wish to cancel the contract any sum debited to us will be refunded to you, less our direct costs of recovery, as soon as possible and in any event within 30 days of your cancellation.

You will not have the right to cancel a purchase for the supply of goods made to your specifications or clearly personalised or by which of their nature cannot be returned.

B2B (business to business) customers do not have a right to cancel once goods have been delivered.

Customer Services

In the first instance please contact GaragePride Ltd on 01743 742028 or by email at salesATgaragepride.co.uk, stating clearly the nature of your query.
Your query will be dealt with as soon as practical but not later than within 5 working days by one of the Customer Services Team.
If for any reason an answer cannot be provided within 5 working days, we will inform you of the reason for this and keep you updated as to its progress.