How do I install the panels?
Install Strips fixed to the wall, ideally at 600mm intervals, provide multiple panel support points and increase load capacity. Once these are secured, the storage panels sit on these strips and are ready to use. Install strips are not entirely necessary as panels can be fixed directly to the wall. However they do provide a more satisfactory installation and no screw heads are visible.
Can I cut the panels?
Yes, they can be cut using wood-working tools.
How many install strips do I need?
Each install strip is made up of three sections that can be snapped off to accommodate the design of the wall. You will need 5 of these snapped off sections for every 8 foot panel.
The easiest way of working this out is to look at the number of panels you have, multiply that by 5 and then divide the answer by 3.
For example, if you had 6 panels you would do the following:
6 x 5 = 30
30/3 = 10
So, in this case you would need to order 10 install strips.
Please remember that you will need to round up if you are not left with a whole number to ensure that you have enough.
The kits that we have on the website do include the install strips. This is something to bear in mind to save ordering too many install strips.
Install strips are best fitted onto wooden battens or studding.
Will my wall be able to take the weight of the StoreWall?
This very much depends on the wall you are installing the panels on to. If it is going into a brick or breeze block it will be fine.
StorePanel is only going to be as strong as the wall that it is on so although a plaster board wall would take the weight of the panels, it would not take the weight of the items that you hang from it. It is essential therefore that the install strips are attached to the studding so the panels are able to meet your storage needs.
What is the maximum load for the StorePanel panels?
The panels are made of a high density heavy duty material. There is no definitive load capacity but customer do hang heavy items off them such as gym weights and medium duty lawn mowers. Be sure to spread the load however using 2-3 hooks.
It is very important however, that the install strips are installed correctly and into a wall that is strong enough to take the weight you wish to hang from it.
Can I order a combination of 8 foot and 4 foot panels?
While you can do this, we do recommend against it. The different size panels will be made in different batches we find that there can be a shade difference between the two and if placed side by side does not look a perfect match.
The panels are very easily cut down to size, so we would recommend using all 8 foot or all 4 foot in your design.
What can I do about edges and joins?
We have a selection of different shaped strips that can be placed over joins and the edges. Although the joints and edges are finished well these strips are available should you want a professionally finished look to your wall.
How will my StorePanel™ items arrive?
This very much depends on the size of your order. If it is a large order then they will arrive on a pallet to your door. 8ft panels are delivered on a double oversize pallet for their protection. For smaller orders we use a courier such as UPS to get you your items.
In both cases we will contact you first to book in a suitable day for you to receive your items.